Set of valves for half- or full valving (Blues series, PT Gazell method)

x1000hvset-PT

> Extras + Accessory + 0.00 €
9.00 €
VAT incl.

Extras + Accessory
Spare parts
Valves for self-installation - suited for all models from the Blues-series (10 hole models); 3 valves for each length (30 pcs.)

You get the original valves that we use for the optional available >Half-valved instruments!

Valves minimize air loss when playing blow or draw notes. If both reeds of a corresponding reed pair are equipped with valves, the possibilities of bending the notes is very limited. If a valve is only closing the lower tuned reed of the pair then bending notes remains possible (= half-valving).

On a fully valved harmonica air-loss is minimized, bendability is restricted very much. The valve set provided is suited for one full-valved instrument (+ set of spare valves) or three half-valved instruments.

On half-valved Richter instruments the valves(=windsavers) must be attached onto the draw plate of 1-6 (the valve is situated on the inside of hole) and onto the blow plate of 7-10 (valve is situated on outside of upper plate then). This leads to better air-tightness of the instrument - bending notes are still playable, whereas overbendings can not be played anymore. With half-valving you will get the full chromatic scale with bending instead of using overblows.

Please use very little amounts of a suited glue, e.g. the >original SEYDEL valve glue. If you use superglue (use gel, no fluid!l) please let it dry out 100% as the solvent used in these glues are harmful.

You get the original valves that we use for the optional available >Half-valved instruments!

Valves minimize air loss when playing blow or draw notes. If both reeds of a corresponding reed pair are equipped with valves, the possibilities of bending the notes is very limited. If a valve is only closing the lower tuned reed of the pair then bending notes remains possible (= half-valving).

On a fully valved harmonica air-loss is minimized, bendability is restricted very much. The valve set provided is suited for one full-valved instrument (+ set of spare valves) or three half-valved instruments.

On half-valved Richter instruments the valves(=windsavers) must be attached onto the draw plate of 1-6 (the valve is situated on the inside of hole) and onto the blow plate of 7-10 (valve is situated on outside of upper plate then). This leads to better air-tightness of the instrument - bending notes are still playable, whereas overbendings can not be played anymore. With half-valving you will get the full chromatic scale with bending instead of using overblows.

Please use very little amounts of a suited glue, e.g. the >original SEYDEL valve glue. If you use superglue (use gel, no fluid!l) please let it dry out 100% as the solvent used in these glues are harmful.

... read more
Switch to desktop view Switch to mobile view
Go to top
JavaScript is disabled. Unfortunately you can not use the services of the shop not or only partially.